SMP Medium-Voltage Switchgear
Air-Insulated
Metal-Enclosed Switchgear
Up to 40.5KV
Complete Medium Voltage Switchgear Solutions
SANHUA is a pioneer in the design and manufacture of power distribution and protection equipment for the electrical industry, offering a comprehensive range of medium voltage (MV) solutions to meet the needs of virtually any application.
Excellent Features:
1.EXCELLENT EXPERIENCE:
SMP air-insulated metal-enclosed Medium-Voltage Switchgear provides users with a variety of excellent experience with its Smooth operation, exemplary availability and optimal safety.
2. FLEXIBLE and CUSTOMIZABLE
SMP Switchgear modular construction of the range allows SANHUA Engineering's team of expert engineers to customise each medium voltage power solution based on individual project specification.
Modular Design Concept
The SMP Switchgear system is a modular concept based on the "building blocks" principle, which means that cubicles are produced in series. As a result, the modular SMP concept meets the highest technical standards in a rational, economically sound way. The combination of cubicles is unlimited. Very complex diagrams of distribution and transformer switchgear can be compiled through this extensive spectrum of possibilities. The semi-compact cubicles are particularly beneficial if the available space should pose a problem or if economical factors play an important role. Compartments also contain all functional interlocks which allows for effortless application, according to all current standards, and which allows installation in consumer work spaces. As a result, capacity loss will be minimal. Additionally, the compartments have been fitted with a system for pressure release which shields the user from the consequences of an internal arc.
Typical Application:
- Power generation, transmission and distribution
• Utilities (National generation / transmission / distribution company)
• Private generation / transmission company
• EPC company and etc.
• Power supply companies
• Energy producers
• System operators.
- Industrial plants and general industrial sectors
• Construction, EPC
• Industrial plants, petrochemicals, etc.
• Buildings, landmark, hospital, etc.
Standards and Specifications
The switchgear complies with the standards of IEC60298,GB3906,DL404 etc.
Enclosure protection degree of switchgear is IP4X, protection degree is IP2X when the door of VCB room is open and the trolly is be drew out.
During the installation and running of electric system, observe all the relevant information in the IEC and the safety regulations in GB or local electrical utility, and consider the relevant information provided by Guilin Sanhua Mechanical&Electronical Automation Engineering Co.,Ltd.
Normal Service Conditions
Normal service conditions of switchgear following:
Ambient temperature in room:
Maximum +40°C
Maximum 24 hour average +35°C
Minimum (according to "minus 15 indoor class") -15°C
Ambient humidity in room: 95% and less
Daily average relative humidity less than 95%
Monthly average relative humidity less than 90%
Height above sea level at site less than 1000m
Earthquake intensity: less than 8 degree
This product should not be used under conditions of fire, explosion,earthquake and chemical corrosion environments.
Switchgear technical data
| Rated voltage |
kV |
12 |
| Rated power-frequency withstand voltage(1min) |
kV |
42 |
| Rated lightening impulse withstand voltage |
kV |
75 |
| Rated frequency |
Hz |
50 |
| Rated main bus bar current |
A |
1600,1200,2500,3150,4000 |
| Rated branching bus bar current |
A |
630,1250,1600,2000,2500,3150,4000* |
| 4s Short-time withstand current(rms.) |
kA |
16,20,25,31.5,40 |
| Peak withstand current(peak.) |
kA |
40,50,63,80,100,125 |
*with forced ventilation.
**3 second for 40kA
***The short-circuit capability of transformer for measure should be considered by oneself.
Note: If you need further detailed data, please contact me
Performance bearing inside fault arc
SMP Switchgear has been considered with the problem of inside fault arc in switchgear on design. It is tested strictly according to GB3906 and IEC298, thus ensure effectively the safety of equipment and operator.
Outline dimensions and weight
Outline dimensions
| Height a------------------------------------------- 2200(mm) |
| Width b: |
Rated branching bus bar current up to 1250A-------------800mm
Rated short-circuit breaking current(rms.) up to 31.5KA-----800mm |
| Rated branching bus bar current up to 1600A,Rated short-circuit breaking current(rms.) up to 40KA---------------------------------------------800 (mm) |
| Rated branching bus bar current over 1600A--------------1000(mm) |
| Depth C---------------------------------------------1350/1500 (mm) |
Weight 800~1200kg,for table 1 showing.
Note: If you need further detailed data, please contact me
General Structure of SMP-12 Switchgear
3.1 Basic structure(Figure3/1)
The basic structure of switchgear panel comprises the panel itself a removing part. The panel and main components can see in figure 3/1.Incoming-line panel or outgoing-line panel are diagram of basic switchgear panel,there are other derivative diagram,for example ,contact panel or metering panel .in addition,There are so many diagram of the switchgear panel with stationary type load switch,(SF6)VCB trolly,VC trolly,Disconnect trolly. The panel has two maintenance modes. That is single-face maintenance and double-face maintenance. The detail of structure and main components, can reference order document.
Figure3/1:Basic structural sectional view of incoming line or outgoing line
| Compartment: |
| A |
Bus bar compartment |
C |
Cable compartment |
| B |
Trolly compartment |
D |
Low-voltage compartment |
Master parts: |
| 1 |
Bus bar |
2 |
Insulator |
| 3 |
Fixed contact |
4 |
Bush |
| 5 |
Current transformer |
6 |
Earth switch |
| 7 |
Cable terminal |
8 |
Arrester |
| 9 |
Zero-sequence current |
10 |
VCB trolly |
| 10.1 |
Slip handle |
10.2 |
Lock key(link to sliding handle) |
| 11 |
Control and protection unit |
12 |
Busbar bushing |
| Master accessories: |
| 13 |
Operation hole of screw machine |
14 |
Cable grip |
| 15.1 |
Cable lock-ring |
15.2 |
Connection board |
| 16 |
Earth bus |
17 |
Control wiring plug |
| |
|
|
|
| 17.1 |
Interlock lever |
18 |
Pressure-relief plate |
| 19 |
Flying rings |
20 |
Transport cart |
| 20.1 |
Lock bar |
20.2 |
Regulating wheel |
| 20.3 |
Guide bar |
|
|
3.3 Compartments in switchgear
3.3.1 VCB Compartment
The vacuum circuit breaker trolly is installed in the breaker compartment with guide rails and can be moved between two different positions of operation, test,isolation. While the trolly move from service position to test/ isolation position, The movable door automatically covers the stationary contacts and opens in the opposite direction. The trolly can be operated when the compartment door is closed. Through the observation window on the door, you can see the position of the trolley, the ON (breaker closed)/OFF (breaker open) button on the trolley, Closed and open status indicators and charged/discharged status indicators.
VCB trolly
The trolly can be moved by manual. The structure of the trolly is made of the steel, the VCB and other equipment are installed on top of it. The arm of spring bush is installed on the pillar of the VCB,acts as an electrical connection when the trolley is inserted into the operating position. Signal, protection and control lines between the trolley and the switchgear, connected with a plug. The trolly is fixed on the test position as soon as it is pushed into the switchgear, and be connection to tgrounding of the switchgear. The location of the trolley can be seen through the observation window or the trolley electrical position indicator mounted on the panel of the low voltage compartment.
In addition to vacuum circuit breakers, the handcart can be equipped with vacuum contactors, isolation devices and metering equipment.
Bus bar compartment
The busbars are connected from one switchgear to another and are secured by branch busbars and bushings. The rectangular branch busbar is directly bolted to the main busbar without any coupling clamps. All bus bars and branch bus bars are covered with heat shrink tubing. The bushing plate and bushing isolate the busbar between the cabinets and have a supporting function. This support is generally required for switchgear with high electrical stress.
Cable compartment
Current transformers and earthing switches are installed at the rear of the cable compartment. Lightning arresters can also be installed in the cable compartment. When the cable compartment door is opened, there is enough space for construction personnel to enter the cabinet to install cables (up to 6 cables can be connected in parallel). The bottom plate covering the cable entrance can be made of non-magnetic stainless steel plate. Sewn, removable, easy on-site operation. The opening of the reducing sealing ring that passes through the primary and secondary cables in the bottom plate should be adapted to the installed cables to prevent small animals from entering.
For cable trenches with high humidity, it is recommended to seal the switchgear with fireproof mud and epoxy resin.
Low-voltage compartment
The secondary components of the switch cabinet are installed in the low-voltage room and on the door. The control wire trough has ample space and has a cover plate. The left wire trough is used to arrange the wires going in and out of the cabinet, and the right wire trough is used to lay the internal connection of the switch cabinet. There are control wire crossing holes on the side plate of the low-voltage room to control the connection of the power supply.
Our project at site, PT. Gunung Raja Paksi Tbk Indonesia 2×20MW power plant project
PT. GUNUNG RAJA PAKSI TBK is located in Bekasi, West Java, Indonesia and is part of the Iron and Steel Mills and Ferroalloy Manufacturing Industry. PT. GUNUNG RAJA PAKSI TBK has 4,000 total employees across all of its locations and generates $613.01 million in sales (USD). (Employees figure is estimated).
vacuum circuit breaker
Low voltage room
Current transformer room
Busbar room
){kind=link}